Add:Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
_
07
2023
-
03
What to know when using Rotary Drilling Rig Hydraulic Motor china
Avoid sudden start or stop when the system is under load, the brakes will cause pressure spikes, it is impossible for the pressure relief valve to react so fast to protect the Rotary Drilling Rig Hydraulic Motor china from damage.
Avoid sudden start or stop when the system is under load, the brakes will cause pressure spikes, it is impossible for the pressure relief valve to react so fast to protect the Rotary Drilling Rig Hydraulic Motor china from damage.
Check the oil level of the fuel tank frequently. This is a simple but important preventive measure. If the leak goes undetected or is not repaired, the system can quickly lose enough hydraulic fluid to create a vortex at the pump inlet, allowing air to suck in and cause damage.
Generally, there should be enough back pressure on the oil return port of the low-speed Rotary Drilling Rig Hydraulic Motor china, especially for the inner curve Rotary Drilling Rig Hydraulic Motor China, otherwise the roller may break away from the curved surface and cause impact, and at least it will generate noise and reduce the service life If it is heavy, it will crush the roller and damage the entire Rotary Drilling Rig Hydraulic Motor china. The general back pressure value is about 0.3-1.0 MPa, the higher the speed, the higher the back pressure should be.
Rotary Drilling Rig Hydraulic Motor china
Previous page
Previous page
CONTACT US
Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
+86-13348557878 (Mr. Sun) 、+86-15605929118 （Manager Hong）
13348557878@163.com (Mr. Sun)、15605929118@163.com (Manager Hong)
Scan WeChat and add followers