Add:Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
_
22
2023
-
03
quality Parker Hydraulic Pumps need to know these
quality Parker Hydraulic Pumps should be jogged several times when starting.
quality Parker Hydraulic Pumps should be jogged several times when starting. After the oil flow direction and sound are normal, run at low pressure for 5 to 10 minutes, and then put into normal operation. Before the plunger pump is started, the pump must be filled with clean working oil through the oil drain port on the casing.
The oil must be clean and must not be mixed with mechanical impurities and corrosive substances. For a hydraulic system without a filter device on the oil suction line, it must be refueled to the oil tank through an oil filter vehicle (filter accuracy less than 25 μm).
The maximum pressure and maximum speed of quality Parker Hydraulic Pumps refers to the peak value allowed in a short period of time during use, and long-term use should be avoided, otherwise it will affect the life of quality Parker Hydraulic Pumps.
The normal working oil temperature of Parker Hydraulic Pumps is 15-65°C. The highest temperature on the pump casing is generally 10-20°C higher than the oil temperature at the pump inlet in the fuel tank. When the oil temperature in the fuel tank reaches 65°C, the temperature on the pump casing The maximum temperature should not exceed 75-85°C.
quality Parker Hydraulic Pumps
Previous page
Next page
Previous page
Next page
CONTACT US
Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
+86-13348557878 (Mr. Sun) 、+86-15605929118 （Manager Hong）
13348557878@163.com (Mr. Sun)、15605929118@163.com (Manager Hong)
Scan WeChat and add followers