Add:Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
_
04
2023
-
04
Relevant matters needing attention for connection of china Parker Hydraulic Pumps
The oil inlet and outlet of China Parker Hydraulic Pumps should be installed firmly, and the sealing device should be reliable, otherwise, air inhalation or oil leakage will occur, which will affect the performance of China Parker Hydraulic Pumps.
The oil inlet and outlet of China Parker Hydraulic Pumps should be installed firmly, and the sealing device should be reliable, otherwise, air inhalation or oil leakage will occur, which will affect the performance of China Parker Hydraulic Pumps.
China Parker Hydraulic Pumps self-suction height does not exceed 500mm (or the inlet vacuum does not exceed 0.03MPa). If the oil supply pump is used for oil supply, the oil supply pressure must not exceed 0.5MPa. When the oil supply pressure exceeds 0.5MPa, use pressure-resistant sealing ring. For plunger pumps, reverse irrigation and self-priming should be used as much as possible.
Before installing China Parker Hydraulic Pumps, check whether the depth of the installation hole is greater than the shaft extension of the pump, so as to prevent the shaft jacking phenomenon and avoid burning the pump.
china Parker Hydraulic Pumps
Previous page
Previous page
CONTACT US
Room 203, No. 22-11 Zhancheng Road, Licheng District, Quanzhou City, Fujian Province
+86-13348557878 (Mr. Sun) 、+86-15605929118 （Manager Hong）
13348557878@163.com (Mr. Sun)、15605929118@163.com (Manager Hong)
Scan WeChat and add followers